D-Link DAP-2695 Command Line Interface Reference Manual

802.11 b/g /n Access Point Command Line Interface Manual
22
set pvid_sys
Set system PVID
set pvid_sys
set groupvid_primary
Set wlan port member of group VID
set groupvid_primary
set groupvid_eth
Set LAN port member of group VID
set groupvid_eth
set groupvid_sys
Set system port member of group VID
set groupvid_sys
set groupviddel
Delete port member of group VID
set groupviddel
set groupvidname
Set Service Set ID
set groupvidname
set wds-pvid
Set PVID of WDS[index]
set wds-pvid [index]
set wds-groupvid
Set group VID of WDS[index]
set wds-groupvid [index]
set wds-updownlink
Set uplink/downlink state of WDS[index]
set wds-updownlink [index]
set multi-pvid
Set PVID of Multi-SSID[index]
set multi-pvid [index]
set multi-groupvid
Set Group VID of Multi-SSID[index]
set multi-groupvid [index]

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm