D-Link DAP-2695 - Page 24

802.11 b/g /n Access Point Command Line Interface Manual
24
get array-sync-multissid
Display AP Array sync multissid state
get array-sync-multissid
get array-sync-multissid_hidden
Display AP Array sync multissid_hidden state
get array-sync-multissid_hidden
get array-sync-multisecurity
Display AP Array sync multisecurity state
get array-sync-multisecurity
get array-sync-multiwmm
Display AP Array sync multiwmm state
get array-sync-multiwmm
get array-sync-qos
Display AP Array sync qos state
get array-sync-qos
get array-sync-vlan
Display AP Array sync vlan state
get array-sync-vlan
get array-sync-schedule
Display AP Array sync schedule state
get array-sync-schedule
get array-sync-time
Display AP Array sync time state
get array-sync-time
get array-sync-log
Display AP Array sync log state
get array-sync-log
get array-sync-adminlimit
Display AP Array sync adminlimit state
get array-sync-adminlimit
get array-sync-system
Display AP Array sync system state
get array-sync-system
get array-sync-consoleprotocol
Display AP Array sync consoleprotocol state
get array-sync-consoleprotocol
get array-sync-snmp
Display AP Array sync snmp state
get array-sync-snmp
get array-sync-pingctl
Display AP Array sync pingctl state
get array-sync-pingctl
get array-sync-dhcp
Display AP Array sync dhcp state
get array-sync-dhcp
get array-sync-login
Display AP Array sync login state
get array-sync-login
get array-sync-acl
Display AP Array sync acl state
get array-sync-acl
get array-sync-band
Display AP Array sync band state
get array-sync-band
Set Command:
Function
Syntax
set aparray-state
Set AP Array state
set aparray-state
set arrayname
Set AP Array arrayname
set arrayname
set arrayrole
Set AP Array role[master:1, backup master:2, slaver:3]
set arrayrole [1/2/3]
set arraypassword
Set AP Array password
set arraypassword
set array_syncnode_enable
set array_syncnode enable
set array_syncnode_enable
set array_syncnode_disable
set array_syncnode disable
set array_syncnode_disable