DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter Description
Inform Settings
On
Move the switch to the right so the access point may send reports
(data on the device and network statistics) to the ACS.
Interval Specify the time period (in seconds) between sending reports.
Auto Configuration Server Settings
URL address The URL address of the ACS provided by the ISP.
Username
The username to connect to the ACS.
Password The password to connect to the ACS.
Connection Request Settings
Username
The username used by the ACS to transfer a connection request to
the access point.
Password The password used by the ACS.
Request port
The port used by the ACS. By default, the port 8999 is specified.
Request path The path used by the ACS.
When you have configured the parameters, click the APPLY button.
Page 133 of 175
To Next Page
Loading...
