DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Firewall
This section is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
In this menu you can configure the firewall of the access point:
• add rules for IP filtering
• create virtual servers
• define a DMZ
• specify restrictions on access to certain web sites.
IP Filter
On the Firewall / IP Filter page, you can create new rules for filtering IP packets and edit or
remove existing rules.
Figure 119. The Firewall / IP Filter page.
To create a new rule, click the ADD button ( ).
Page 142 of 175
To Next Page
Loading...
