DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
• change the password used to access the access point's settings
• restore the factory default settings
• create a backup of the access point's configuration
• restore the access point's configuration from a previously saved file
• save the current settings to the non-volatile memory
• reboot the access point
• change the web-based interface language
• update the firmware of the access point
• configure automatic notification on new firmware version
• view the system log; configure sending the system log to a remote host
• check availability of a host on the Internet through the web-based interface of the access
point
• trace the route to a host
• allow or forbid access to the access point via TELNET
• configure automatic synchronization of the system time or manually configure the date and
time for the access point.
Page 151 of 175
To Next Page
Loading...
