DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Remote Access
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / Remote Access page, you can configure access to the web-based interface
of the access point. By default, the access from external networks to the access point is closed. If
you need to allow access to the access point from the external network, create relevant rules.
Figure 112. The Advanced / Remote Access page.
To create a new rule, click the ADD button ( ).
Figure 113. The window for adding a rule for remote management.
Page 134 of 175
To Next Page
Loading...
