DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Devices and Rules
On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each
device separately.
Figure 136. The Yandex.DNS / Devices and Rules page.
In the Known Clients section, the devices connected to the local network of the access point at
the moment and their relevant filtering mode are displayed.
To create
7
a new filtering rule for a device, click the ADD button ( ) in the Rules section, or
left-click the name of the filtering mode in the line of the device for which a rule should be created
in the Known Clients section.
Figure 137. Adding a new rule for the Yandex.DNS service.
7 When a new rule for filtering is created, a MAC address and IP address pair is displayed on the Connections
Setup / LAN page. The created pair will be deleted with the relevant rule.
Page 169 of 175
To Next Page
Loading...
