DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
5. If you want to create an additional wireless network isolated from your LAN, select the
Enable guest network checkbox (available for the Router and WISP Repeater modes
only).
Figure 50. The page for configuring the wireless network.
6. In the Network name field, specify your own name for the guest wireless network or leave
the value suggested by the access point.
7. If you want to create a password for access to the guest wireless network, deselect the Open
network checkbox and fill in the Password field.
8. Click the NEXT button to continue or click the BACK button to specify other settings.
Page 59 of 175
To Next Page
Loading...
