DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter Description
Enable additional
channels
If the switch is moved to the left, the device automatically selects
one of available standard channels. To use additional channels
(the 12th and 13th), move the switch to the right.
Channel
The wireless channel number.
To select a channel manually, left-click; in the opened window,
select a channel and click the SAVE button. The action is available,
when the Select channel automatically switch is moved to the
left.
Enable periodic
scanning
Move the switch to the right to let the access point search for a free
channel in certain periods of time. When the switch is moved to the
right, the Scanning period field is available for editing.
Scanning period
Specify a period of time (in seconds) after which the access point
rescans channels.
When you have configured the parameters, click the APPLY button.
To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed
parameters and click the APPLY button.
Page 93 of 175
To Next Page
Loading...
