D-Link DAP-3711

31D-Link DAP-3711 User Manual
Section 3 - Conguration
Only 8 to 63 bits of upper and lower case English
letters, numbers and special symbols are supported
`~!@#$%^&*()-_=+
When you enable this function, the clients which
are connected to the DAP-3711 will not be able to
communicate with each other.
When you enable this function, you will be able
to set up a maximum upload/download speed for
each client.
Use this to set up the VLAN ID for the SSID.
Use this to set up the maximum number of clients
that can connect to the DAP-3711.
Use this to set up a list of MAC addresses that you
want to allow or disallow to connect to DAP-3711.
Key:
Client
Isolation:
Speed Limit:
VLAN ID:
Max. Users:
MAC Filtering:
WPA/WPA2
Hybrid-PSK:
You can select the 802.11 mode
which the DAP-3711 should use.
It is suggested to keep this setting
at 802.11ac to provide an optimal
transmission rate.