D-Link DAP-3711 - Installation Guide; Site Preparation and Powering

9D-Link DAP-3711 User Manual
Section 2 - Installation
Preparation before Installation
Before installing the DAP-3711, check the distance between the two sides and ensure
that they are within wireless signal range of each other. It may be helpful to use a Graphic Information System (GIS) program
such as Google Earth to check for obstructions between the two sites. If there is an obstruction, it may help to install the DAP-
3711 as high as possible to prevent the signal from being blocked.
Note: Ensure that both devices have the same model number and are running the same rmware version. The radiation pattern and wireless protocol of the DAP-3711 is designed
for high-performance bridge connectivity. Using dierent models or models with mismatched rmware versions may cause problems, such as performance degradation or a
reduction in coverage area.
Installation