D-Link DAP-3711 User Manual

52D-Link DAP-3711 User Manual
Appendix A - Technical Specications
Technical Specications
Standards
802.11a/n/ac
Device Interfaces
2 x 100/1000 Mbps Ethernet port, reset button
LEDs
Power, WLAN, LAN, Signal strength
Antenna Type
Directional
Antenna Gain
15 dBi
Beamwidth
H: 40°, V: 15°
Standards
802.11a/n/ac
Protection
8 kV ESD Protection
Enclosure
ABS, IP66 compliant
Operation Modes
AP, Station, WDS AP, WDS Station
Operating Frequency
5180~5320 MHz, 5745~5825 MHz
Max. Transmit Power¹
27 dBm
Wireless Speed
Up to 867 Mbps
Bandwidth Support
20/40/80 MHz
Wireless Conguration
Auto channel support, transmit power selection,
SSID broadcast enabling/disabling
Security
802.11i 128-bit AES Personal / Enterprise
System Tools
Ping, traceroute, NTP, ping watchdog, syslog,
spectrum analyzer, throughput testing (lperf )
Smart Wireless Technology
TDMA, Auto ACK, intelligent rate control,
co-channel interference avoidance
Advanced Features
Max. station limit
1
Range will vary depending on country’s maximum transmit power output regulation. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications.
Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.

D-Link DAP-3711 Specifications

General

5 GHz	Yes
2.4 GHz	-
Bandwidth	0.08 GHz
Frequency band	5.745 - 5.825 GHz
Channels quantity	2 channels
Fit AP mode features	Wireless distribution system (WDS)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n
Maximum outdoor range	5000 m
Ethernet LAN data rates	100, 1000 Mbit/s
Transmitting power (CE)	27 dBm
Maximum data transfer rate	867 Mbit/s
Security algorithms	128-bit AES
Service Set Identifier (SSID) features	SSID broadcast
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
AC input voltage	24 V
Power consumption (typical)	15 W
Placement	Pole
Certification	CE, FCC
Product color	White
LED indicators	LAN, Power, Signal strength, WLAN
Housing material	Acrylonitrile butadiene styrene (ABS)
International Protection (IP) code	IP66
Antenna type	Internal
Antenna gain level (max)	15 dBi
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 65 °C
Operating relative humidity (H-H)	0 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	45 mm
Width	288 mm
Height	88 mm
Weight	600 g