D-Link DAP-3711

37D-Link DAP-3711 User Manual
Section 3 - Conguration
Service
In the service tab, you can congure the following settings: Time, Automatic Restart, External System Log Server, Ping Watchdog and LED Settings.
Here you can configure the DAP-3711’s time
settings.
Use this to select the Time Zone in your location.
If Manual is selected, you can change the time,
or click Synchronize to sync the DAP-3711’s time
with user’s PC.
If NTP is selected, the DAP-3711 will sync with a
dedicated NTP server. Internet access is required
if this setting is enabled.
To enable the SSH service. Default is disable.
If user enable this service, the device is accepted
to remote access by SSH.
The process in which the device will search within
its range to nd other active devices that have
registered themselves as visible to other devices.
Time:
Time Zone:
Calibration
Type:
Remote
Management:
SSH Service:
Device
Discovery:
When this function is enabled, the DAP-3711 will
automatically restart according to a schedule that
you set.
There are three items can be selected: Every Day,
Every Week, and Once.
Time Restart:
Reboot Period: