D-Link DAP-X3060 User Manual

12D-Link DAP-X3060 User Manual
Section 3 - Conguration
To change the channel, rst toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make
the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
Allows you to select the channel width you would like to operate in 2.4GHz and 5GHz. Use the drop-down menu to choose 20
MHz or Auto 20/40 MHz or Auto 20/40/80 MHz.
Use the drop-down menu to choose Open System, Enhanced Open, Enhanced Open + Open, WPA-Personal, WPA-Enterprise,
or 802.1x.
• Select Open System, Enhanced Open, Enhanced Open or Open, to communicate the key across the network (WEP).
• Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
• Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server.
• Select 802.1X if your network is using port-based Network Access Control.
Note: The default Open System authentication allows wireless connection without requiring user authentication. It is highly
recommended that you encrypt your network using one of the security methods other than the default setting.
Channel:
Channel Width:
Authentication:
Note: 1. The default Open System authentication allows wireless connection without requiring user authentication. It is
highly recommended that you encrypt your network using one of the security methods other than the default
setting.
2. Two SSIDs will be occupied when using Enhanced Open + Open

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English