D-Link DAP-X3060 User Manual

42D-Link DAP-X3060 User Manual
Section 3 - Conguration
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-X3060. When Dynamic IP (DHCP) is
selected, the other elds here will be grayed out.
Please allow about 2 minutes for the DHCP client
to be functional once this selection is made.
Assign a static IP address that is within the IP
address range of your network.
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Enter the IP address of the gateway/router in your
network.
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Enter the username for the new account here.
Enter the password for the new account here.
Click to create a dened rule.
Click to remove the settings from the menu
interface.
Click to edit the selected gateway entry.
Click to delete the gateway entry.
Click to save the updated conguration. To make
the updates permanent, click Conguration > Save
and Activate.
Get IP From:
IP Address:
Subnet Mask:
Gateway:
DNS:
Username:
Password:
Add:
Clear:
Edit:
Delete:
Save:

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English