D-Link DAP-X3060

49D-Link DAP-X3060 User Manual
Section 3 - Conguration
Assign a static IP address that is within the IP address
range of your network.
Enter the subnet mask. All devices in the network must
share the same subnet mask.
Enter the IP address of the gateway/router in your
network.
Enter a DNS server IP address. This is usually the local
IP address of your gateway/router.
Enter the LDAP server’s IP address or domain name here.
Enter the LDAP server’s port number here.
Select the authentication mode here. Options to choose
from are Simple and TLS.
Enter the LDAP server account’s username here.
Enter the LDAP server account’s password here.
Enter the administrator’s domain name here
Enter the LDAP account attribute string here.
This string will be used to search for clients.
Enter the identity’s full path string here. Alternatively,
select the Auto Copy checkbox to automatically add the
generic full path of the web page in the identity eld.
Click to edit the selected entry.
Click to delete the entry.
Click to save the updated conguration. To make the
updates permanent, click Conguration > Save and
Activate.
IP Address:
Subnet Mask:
Gateway:
DNS:
Server:
Port:
Authenticate Mode:
Username:
Password:
Base DN:
Account Attribute:
Identity:
Edit:
Delete:
Save: