D-Link DAP-X3060 User Manual

51D-Link DAP-X3060 User Manual
Section 3 - Conguration
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-X3060. When Dynamic IP (DHCP) is
selected, the other elds here will be grayed out.
Please allow about 2 minutes for the DHCP client
to be functional once this selection is made.
Assign a static IP address that is within the IP
address range of your network.
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Enter the IP address of the gateway/router in your
network.
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Enter the POP3 server’s IP address or domain
name here.
Port: Enter the POP server’s port number here.
Select the connection type here. Options to
choose from are None and SSL/TLS.
Click to edit the selected entry.
Click to delete the entry.
Click to save the updated conguration. To make
the updates permanent, click Conguration >
Save and Activate.
Get IP From:
IP Address:
Subnet Mask:
Gateway:
DNS:
Server:
Port:
Connection Type:
Edit:
Delete:
Save:

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English