30D-Link DCS-2670L User Manual
Section 3: Conguration
Dynamic DNS
If your Internet Service provider only provides you with a dynamic IP address, DDNS allows you to access your camera remotely using a domain
name. To do this, you will need to have an account with one of the DDNS services listed in the drop-down box on this page.
Enable DDNS:
Server Address:
Host Name:
User Name:
Password:
Timeout:
Status:
Select this checkbox to enable the DDNS function.
Select your Dynamic DNS provider from the drop-down menu or
enter the server address manually.
Enter the host name of the DDNS server.
Enter the user name or e-mail used to connect to your DDNS account.
Enter the password used to connect to your DDNS account. Enter it
again in the Verify Password eld.
Enter the DNS timeout values you wish to use.
This indicates the connection status, which is automatically
determined by the system.
To Next Page
Loading...
