36D-Link DCS-2670L User Manual
Section 3: Conguration
Time and Date
This section allows you to automatically or manually congure, update, and maintain the internal system clock for your camera. After making
your changes, click the Save Settings button for them to take eect.
Time Zone:
Enable Daylight
Saving:
Auto Daylight
Saving:
Set Date and Time
Manually:
Oset:
Start Time / End
Time:
Synchronize with
NTP Server:
NTP Server:
Set Date and Time
Manually:
Copy Your
Computer's Time
Settings:
Select your time zone from the drop-down menu.
Select this to enable Daylight Saving Time.
Select this option to allow your camera to congure the Daylight Saving
settings automatically.
Selecting this option allows you to congure the Daylight Saving date
and time manually.
Sets the amount of time to be added or removed when Daylight Saving
is enabled.
Set the date and time to start using and stop using daylight saving.
Enable this feature to obtain time automatically from a Network Time
Protocol (NTP) server.
Network Time Protocol (NTP) synchronizes the DCS-2670L with an
Internet time server. Choose the one that is closest to your location.
This option allows you to set the time and date manually.
This will synchronize the time information from your PC.