45D-Link DCS-2670L User Manual
Section 3: Conguration
Advanced
ICR and IR
Here you can congure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) lter can be disengaged for increased sensitivity in low light
environments. After making your changes, click the Save Settings button for them to take eect.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
O:
On:
Sync with ICR:
Schedule:
The Day/Night mode is set automatically. You can use the Sensitivity
drop-down box to set when the camera will switch to Night mode.
The text box to the right shows which lighting conditions are currently
being detected by the camera for reference. You can refresh this status
by clicking the Refresh button.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera will enter
Day mode at the starting time and return to Night mode at the ending
time.
The camera can enable or disable the IR (infrared) light according to
your preferences. This setting provides additional controls depending on
your specic application.
The IR light will always be o.
The IR light will always be on.
The IR light will turn on when the ICR lter is disabled (night mode).
The IR light will turn on or o according to the schedule that you specify
below.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
