D-Link DCS-2670L - Https

46D-Link DCS-2670L User Manual
Section 3: Conguration
HTTPS
This page allows you to install and activate an HTTPS certicate for encrypted access to your camera. After making your changes, click the Save
Settings button for them to take eect.
Enable HTTPS
Secure Connection:
Create Certicate
Method:
Status:
Enable HTTPS connections. You will need to create a certicate using
the settings below.
Choose the way the certicate should be created. Three options are
available:
• Create a self-signed certicate automatically
• Create a self-signed certicate manually
• Create a certicate request and install
Displays the details of the SSL certicate that is being used.
Note:
The certicate cannot be removed while HTTPS is still enabled. To
remove the certicate, you must rst uncheck Enable HTTPS secure
connection.