D-Link DCS-2670L

16D-Link DCS-2670L User Manual
Section 2: Installation
Waterproong Your Camera
After conguring your camera, follow the instructions below to prevent water from entering the camera's Ethernet and Power Cable connections.
Waterproong your connectors when using Wi-Fi:
Note: Due to its IP65 rating we recommend that you install your device under a roof or a shelter
to protect the Power and Ethernet connections from water seepage. However, the cables and
connections need to be located away from all potential water hazards.
Step 1:
Plug the power adapter into the dongle.
Step 2:
To waterproof the Ethernet socket, align the cap according to the thread and twist it clockwise
to seal it.