D-Link DCS-5000L

35D-Link DCS-5000L User Manual 35
Section 3 - Conguration
Click to enable the DDNS function.
Select your Dynamic DNS Server from the pull-down menu.
Enter the host name of the DDNS server.
Enter your username or email used to connect to the DDNS.
Enter your password used to connect to the DDNS server.
This allows you to specify the periodic update time for the
DDNS address.
Enable:
Server
Address:
Host Name:
User Name:
Password:
Timeout:
Dynamic DNS (DDNS)
This section allows you to congure the DDNS setting for your camera. DDNS will allow all users to access your camera using
a domain name instead of an IP address.