D-Link DCS-5222L User Manual

20D-Link DCS-5222L User Manual
Section 3: mydlink
Camera Status
If your camera is oine, try the following:
• Check to make sure that the Internet connection to your camera is working properly.
• Try restarting your Internet router.
• Check your camera’s cable connections and make sure they are secure.
• Check to make sure that the LED on your camera is lit solid green.
If you still cannot access your camera, reset your camera and run the Camera Installation Wizard again from the CD-ROM
included in your package.
Here, you can see the online status of each of your cameras. Your online status may be one of the following:
A red X indicates that your camera is oine and currently cannot be accessed remotely.
A green checkmark indicates that your camera is online and ready to use.
A yellow exclamation point indicates that your camera is online, but the camera password
has changed. You will need to enter your new camera password to access your camera
again.

D-Link DCS-5222L Specifications

Camera Specifications

pan range	-170° to 170°
tilt range	-25° to 90°
digital zoom	10x

Power

power input	12 V/1.25 A, 50/60 Hz
power consumption	10.5 watts maximum
aperture	F1.9

Operating Environment

operation temperature	32 to 104 ºF (0 to 40 ºC)
storage temperature	-4 to 158 ºF (-20 to 70 ºC)
humidity	20% to 80% non-condensing

Video Specifications

video resolutions	1280 x 720, 640 x 352
video compression	H.264/MJPEG

Dimensions and Weight

dimensions	4.46 x 4.46 x 4.92 inches (114 x 114 x 125 mm)
weight	1.19 lb (540 grams)
field of view (H)	45.7°