D-Link DCS-5222L User Manual

63D-Link DCS-5222L User Manual
Section 4 - Conguration
System
Click on the Save Conguration button to
save the current conguration to your hard
drive.
To load a saved conguration, click on the
Browse button to select a conguration le
from your hard drive. Then, click the Load
Configuration button to load the new
conguration.
Click this button to reset all settings to their
factory defaults. If you select to reset your
settings, you will need to set up your camera
again.
Clicking the Reboot button will reboot your
device.
Select this option to schedule a time for the
device to reboot.
After making any changes, click the Save button
to save your changes.
This screen allows you to save and restore the camera’s current conguration. You can also reset all settings to the factory default or reboot the device.
Save to Local
Hard Drive:
Load from Local
Hard Drive:
Restore
to Factory
Defaults:
Reboot Device:
Schedule
Reboot:

D-Link DCS-5222L Specifications

Camera Specifications

pan range	-170° to 170°
tilt range	-25° to 90°
digital zoom	10x

Power

power input	12 V/1.25 A, 50/60 Hz
power consumption	10.5 watts maximum
aperture	F1.9

Operating Environment

operation temperature	32 to 104 ºF (0 to 40 ºC)
storage temperature	-4 to 158 ºF (-20 to 70 ºC)
humidity	20% to 80% non-condensing

Video Specifications

video resolutions	1280 x 720, 640 x 352
video compression	H.264/MJPEG

Dimensions and Weight

dimensions	4.46 x 4.46 x 4.92 inches (114 x 114 x 125 mm)
weight	1.19 lb (540 grams)
field of view (H)	45.7°