52D-Link DCS-5222L User Manual
Section 4 - Conguration
Add Event
Create and schedule up to 2 events with their own settings here. After making any changes, click the Save Settings button to save your changes.
Event name:
Enable this
event:
Priority:
Delay:
Trigger:
Video Motion
Detection:
Periodic:
Digital input:
System Boot:
Network Lost:
Enter a name for the event.
Select this box to activate this event.
Set the priority for this event. The event with
higher priority will be executed rst.
Select the delay time before checking the next
event. It is being used for both events of mo-
tion detection and digital input trigger.
Specify the input type that triggers the event.
Motion is detected during live video monitor-
ing. Select the windows that need to be moni-
tored.
The event is triggered in specied intervals. The
trigger interval unit is in minutes.
The external trigger input to the camera.
Triggers an event when the system boots up.
Triggers an event when the network connec-
tion is lost.
To Next Page
Loading...
Need help?
Camera Specifications
Power
