D-Link DCS-5222L User Manual

77D-Link DCS-5222L User Manual
Appendix AA - Networking Basics
Networking Basics
Check your IP address
By default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address,
please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some rewall software
programs may block a DHCP request.
If you are connecting to a wireless network at a hotspot (e.g.
hotel, coee shop, airport), please contact an employee or
administrator to verify their wireless network settings.

D-Link DCS-5222L Specifications

Camera Specifications

pan range	-170° to 170°
tilt range	-25° to 90°
digital zoom	10x

Power

power input	12 V/1.25 A, 50/60 Hz
power consumption	10.5 watts maximum
aperture	F1.9

Operating Environment

operation temperature	32 to 104 ºF (0 to 40 ºC)
storage temperature	-4 to 158 ºF (-20 to 70 ºC)
humidity	20% to 80% non-condensing

Video Specifications

video resolutions	1280 x 720, 640 x 352
video compression	H.264/MJPEG

Dimensions and Weight

dimensions	4.46 x 4.46 x 4.92 inches (114 x 114 x 125 mm)
weight	1.19 lb (540 grams)
field of view (H)	45.7°