43D-Link DCS-5222L User Manual
Section 4 - Conguration
This section allows you to create a preset se-
quence, which automatically moves the camera’s
view between a set of preset views.
To add a preset to the sequence, select it from the
drop-down box at the bottom of this window, set
the Dwell time to determine how long the cam-
era view will stay at that preset, then click the Add
button. The preset name will appear in the list, fol-
lowed by the dwell time to view that preset for.
You can rearrange your presets in the sequence by
selecting a preset in the sequence, then clicking
the arrow buttons to move it higher or lower in
the current sequence.
Clicking the trash can button will remove the cur-
rently selected preset from the sequence.
If you want to change the dwell time for a preset,
select it from the list, enter a new dwell time, then
click the Update button.
Preset
Sequence:
To Next Page
Loading...
