Command Line Interface D-Link Web Smart Switch User Manual
1
1
0
0
4
4
logout
ping
[<ipaddr> | <domain_name 255>] {times <value 1-255> | timeout <sec 1-
99>}
ping6
<ipv6addr> {times <value 1-255> | size <value 1-6000> | timeout <sec 1-
99>}
reboot
reset config
show ipif
show switch
config account admin
password
<password>
save
debug info
Each command is listed in detail, as follows:
?
Purpose This command is used to display a list of commands.
Syntax
?
Description
The ? command displays a list of commands of the Switch.
Parameters None.
Restrictions None.
Example usage:
To display a list of commands of the Switch:
To Next Page
Loading...
