Configuration D-Link Web Smart Switch User Manual
3
3
3
3
Figure 4.29 – Configuration > 802.1Q VLAN > Add VLAN
VID: Enter a VLAN ID.
VLAN Name: Enter a name of VLAN.
Port: Click to assign ports as Untag, Tag, or Not Member. A port can be untagged in only one VID.
To save the VID group, click Apply. Click Back to go to the previous window.
You may change the name accordingly to the desired groups, such as R&D, Marketing, email, etc.
VLAN > 802.1Q VLAN PVID
The 802.1Q VLAN PVID setting allows user to configure the PVID for each ports. Click Apply to implement
the changes made.
Figure 4.30 – Configuration > 802.1Q VLAN PVID
VLAN > 802.1Q Management VLAN
The 802.1Q Management VLAN setting allows user to transfer the authority of the switch from the default
VLAN to others created by users. This allows managing the whole network more flexible.
By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN
when this function is enabled. There can only be one management VLAN at a time.
Figure 4.31 – Configuration > 802.1Q Management VLAN
VLAN > Voice VLAN > Voice VLAN Global Settings
Voice VLAN is a feature that allows you to automatically place the voice traffic from IP phone to an assigned
VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the security of
VoIP traffic are guaranteed.
To Next Page
Loading...
