D-Link DIR-803 - Routing

95D-Link DIR-803 User Manual
Section 3 - Conguration
The Device Info page displays the connection details for the DIR-803. It will display the WAN, LAN, and Wireless LAN information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use
Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a
Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect
to establish the PPPoE connection.
Displays the router’s current Time and Firmware version.
Displays the MAC Address and the public IP settings.
Displays the MAC Address and the private (local) IP settings for the
router.
Displays the 2.4GHz wireless MAC Address and your wireless settings
such as Network Name (SSID) and Channel.
Displays the 5GHz wireless MAC Address and your wireless settings
such as Network Name (SSID) and Channel.
Displays a MAC Address and IP Address for each computer and device
connected to the router via Ethernet that is receiving an IP address
assigned by the router (DHCP).
Displays IPv4 and IPv6 Multicast Group Addresses.
General:
WAN:
LAN:
Wireless LAN:
Wireless LAN2:
LAN Computers:
IGMP Multicast
Memberships:
Device Info
Status