4D-Link DIR-803 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
1 WPS Button Press to start the WPS process. The Power LED will start to blink.
2 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, Network Attached Storage (NAS), and video game consoles.
3 Internet Port Connect your broadband modem to this port using an Ethernet cable.
4 Power Receptor Connect the supplied power adapter.
5 Reset Button Press and hold the reset button with a paper clip for six seconds to reset the router to the factory default settings.
4
3
1
2
5
To Next Page
Loading...
