D-Link DIR-803 - Advanced Network Settings

83D-Link DIR-803 User Manual
Section 3 - Conguration
UPnP Universal Plug and Play) allows the router to
automatically open ports. For maximum security,
uncheck to disable this feature. However, you will need
to manually open ports for certain applications. Refer to
“Port Forwarding” on page 67 and “Application Rules”
on page 68.
Checking this box will allow the DIR-803 to respond
to pings. Unchecking the box may provide some extra
security from hackers.
The WAN speed is usually detected automatically. You
may set the port speed of the Internet port to 10Mbps,
100Mbps, or Auto 10/100Mbps (recommended).
Check the box to allow multicast trac to pass through
the router from the Internet (IPv4).
Check the box to allow multicast trac to pass through
the router from the Internet (IPv6).
Enable UPnP IGD:
Enable WAN Ping
Response:
WAN Port Speed:
Enable Multicast
Streams:
Enable IPV6
Multicast Streams:
Advanced Network Settings