D-Link DIR-803 - Time

86D-Link DIR-803 User Manual
Section 3 - Conguration
Time
Displays the current date and time of the router.
Select your Time Zone from the drop-down menu.
Check to enable manual entry of daylight saving
time.
When daylight saving manual entry is enabled, the
oset value is one hour by default.
Enter a DST Start, and DST End. Select Month,
Week, Day of Week, and Time for daylight saving
time.
This option is strongly recommended. Check
the box to synch the date and time with D-Link’s
Internet time server.
Select an NTP Server from the drop-down menu
and click Update Now.
To manually input the Date and Time, enter the
values in these elds for the Year, Month, Day,
Hour, Minute, and Second.
Click Save Settings.
Time:
Time Zone:
Enable Daylight
Saving:
Daylight Saving
Oset:
Daylight Saving
Dates:
Automatically
synchronize with
D-Link’s Internet
time server:
NTP Server Used:
Date and Time:
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. An NTP server will
sync the time and date with your router. Daylight Saving can also be congured to automatically adjust the time when needed.