EasyManua.ls Logo

D-Link DIR-803 - Autoconfiguration

D-Link DIR-803
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54D-Link DIR-803 User Manual
Section 3 - Conguration
IPv6 over PPPoE
Most DSL modems use this type of connection. If you select the IPv6 over PPPoE
option, you will need a User Name and Password from you IPv6 Internet Service
Provider (ISP). This IPv6 Internet connection type requires a username and password
to get online.
PPPoE Session: Select the PPPoE Session value used here. This
option will state that this connection shares it’s
information with the already congured IPv6
PPPoE connection, or the user can create a new
PPPoE connection here.
User Name: Enter the PPPoE Username used here. If you do
not know your user name, please contact your ISP.
Password: Enter the PPPoE Password used here. If you do not
know your password, please contact your ISP.
Verify Password: Re-enter the PPPoE Password used here.
Service Name: Enter the Service Name for this connection here.
This eld is optional.
Click Next to continue.

Table of Contents

Other manuals for D-Link DIR-803

Related product manuals