D-Link DIR-803 - Page 61

56D-Link DIR-803 User Manual
Section 3 - Conguration
6rd IPv6 Prex: Enter the 6rd IPv6 address and prex value used
here.
IPv4 Address: Enter the IPv4 Address used here.
Mask Length: Enter the IPv4 Mask Length used here.
Assigned IPv6 Prex: Displays the Assigned IPv6 Prex value here.
6rd Border Relay IPv4
Address:
Enter the 6rd Border Relay IPv4 Address used
here.
IPv6 DNS Server: Enter the primary IPv6 DNS Server address used
here.
Click Next to continue.
The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect
button to save your settings and reboot the router.
If you need to make changes, click on the Prev button to return to the previous
page. Or click on Cancel to discard all the changes made and return to the main
page.
Tunneling Connection (6rd)
If you select the Tunneling Connection (6rd) option, you must obtain the information listed below from your ISP. Then you can congure the IPv6
6rd tunneling connection settings.