DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Creating Mobile Internet WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct
operation of the mobile WAN connection click the ENTER PIN button in the notification in the top
right corner of the page and enter the PIN code
11
in the window displayed. Then on the connection
creation page, in the General Settings section, select the relevant value from the Connection
type drop-down list and specify the needed values.
Figure 90. The page for creating a new Mobile Internet connection. The General Settings section.
Parameter Description
General Settings
Connection name A name for the connection for easier identification.
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Use as interface
Move the switch to the right in order to create a network interface
for this connection, for example, to combine several interfaces into
a transparent connection.
11 Some models of USB modems do not support disabling the PIN code check on the SIM card through the web-based
interface of the router.
Page 108 of 303
To Next Page
Loading...
