DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Settings
On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its
operation.
!
The SkyDNS service is unavailable when the Yandex.DNS service is enabled.
Figure 219. The SkyDNS / Settings page.
To enable the SkyDNS service, click the ENABLE button. Then in the Mail and Password fields,
enter the account data (the e-mail address and the password correspondingly) specified upon
registration on the SkyDNS service web site. Click the APPLY button. The account data
(authorization status, the tariff used) and the Default profile drop-down list will be displayed on
the page. If needed, from the Default profile list, select another filtering profile which will be
used for all devices of your LAN and click the APPLY button again.
The default filtering profile will be applied to all devices newly connected to the router's network.
Page 293 of 303
To Next Page
Loading...
