DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
VRRP
On the Advanced / VRRP page, you can enable VRRP (Virtual Router Redundancy Protocol),
which is designed to improve availability of routers acting as default gateways. The protocol
enables you to configure several devices as the default virtual router with a common IP address,
which is used as the default gateway by LAN clients.
Figure 190. The Advanced / VRRP page.
If you want to enable VRRP, move the Enable VRRP switch to the right.
Page 243 of 303
To Next Page
Loading...
