DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
When the protocol is enabled, the following elements are displayed on the page:
Parameter Description
Mode
The operation mode of the router.
• Master: The router ensuring data transfer at present. A
device with a higher priority switches to the Master mode.
• Backup: A reserve router, which switches to the Master
mode upon the main router failure in accordance with its
priority level.
Priority
The current priority level of the device. It can differ from the priority
specified by the user if the Enable Object Tracking switch is
moved to the right.
Status
The status of the service working over VRRP.
• Disable: The service is not active.
• Enable: The service is active.
Interface A network interface used by VRRP.
VRID
Specify a unique ID of the virtual router. By default, the value 1 is
specified.
Priority
The priority of the router over other devices, which is used to switch
it to the Master mode. Specify a value from the range 1~255. By
default, the value 100 is specified. If several devices have the same
priority level, the router with the highest IP address will switch to
the Master mode.
IP address The IP address used by LAN devices to access the router.
Mask
The subnet mask of the virtual router.
Delay
An interval (in seconds) between sending service advertisements,
containing information on the priority level and connection status of
the device working in the Master mode. By default, the value 1 is
specified.
Assign virtual MAC
address
Move the switch to the right to enable access to the virtual router by
a virtual MAC address. A virtual MAC address is generated
automatically.
Page 244 of 303
To Next Page
Loading...
