DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
• change the password used to access the router's settings
• restore the factory default settings
• create a backup of the router's configuration
• restore the router's configuration from a previously saved file
• save the current settings to the non-volatile memory
• reboot the router
• change the web-based interface language
• update the firmware of the router
• configure automatic notification on new firmware version
• enable/disable Wi-Fi connection and the Wi-Fi filter, configure automatic reboot of the
device on a schedule, and set a schedule for different rules and settings of the firewall
• view the system log; configure sending the system log to a remote host and/or a USB
storage connected to the router
• check availability of a host on the Internet through the web-based interface of the router
• trace the route to a host
• allow or forbid access to the router via TELNET and SSH
• configure automatic synchronization of the system time or manually configure the date and
time for the router
• enable the Auto Provision function.
Page 265 of 303
To Next Page
