DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host and/or a USB storage connected to the router.
Figure 207. The System / Log page. The Settings tab.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Page 276 of 303
To Next Page
Loading...
