DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the router:
• create or edit VLANs
• use LAN ports of the router as additional WAN ports and also use the WAN port as a LAN
port
• enable and configure the SNMP agent of the router
• add name servers
• configure a DDNS service
• configure autonegotiation or manually configure speed and duplex mode for each Ethernet
port of the router
• configure notifications on the reason of the Internet connection failure
• define static routes
• configure TR-069 client
• enable the function of mirroring the router’s ports
• enable the UPnP IGD protocol
• enable the built-in UDPXY application for the router
• allow the router to use IGMP and MLD
• allow the router to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
through functions for the router
• configure the CoovaChilli service
• enable VRRP.
Page 208 of 303
To Next Page
