DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Traffic Balancing
On the Connections Setup / Traffic balancing page, you can enable the traffic balancing
function. This function enables equal load balancing on the router and increases maximum
bandwidth of your Internet connection while using several WAN connections (for example, if
access to the Internet is provided by several ISPs).
Figure 110. The Connections Setup / Traffic balancing page.
To enable the traffic balancing function, move the Enable switch to the right. Then add
connections to the page among which traffic will be balanced. To do this, click the ADD button
( ) in the Connections List section.
Figure 111. The window for adding a new connection to the page.
Page 130 of 303
To Next Page
Loading...
