DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Mesh Network Main Device (Master)
In order to configure DIR-882 as a main device of your mesh network, from the Connection
method list, select the Super Mesh value. Then from the Device Role list, select the Master
value. From the Frequency band list, select the band where your mesh network operates.
!
The Super Mesh function cannot operate in both bands simultaneously. Select one of the
bands ( 2.4GHz or 5GHz ) for all devices of the configured network.
In order to connect your main device to a wired ISP, from the Work mode list, select the Router
value. In this mode you can configure a WAN connection, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP phone,
and set your own password for access to the web-based interface of the device.
Figure 38. Configuring the Super Mesh function for a main device. The Router mode.
Page 52 of 303
To Next Page
Loading...
