DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
To create a new tunnel, click the ADD button ( ) in the Tunnels section.
!
Setting for both devices which establish the tunnel should be the same.
Figure 113. The page for adding an IPsec tunnel. The General Settings section.
You can specify the following parameters:
Parameter Description
Enable
Move the switch to the right to enable the tunnel.
Move the switch to the left to disable the tunnel.
General Settings
IP version An IP version.
Page 133 of 303
To Next Page
Loading...
