DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
If you need to configure a connection via VLAN, click the ADVANCED MODE button.
Figure 59. The Multimedia Devices Connection Wizard. The advanced mode.
In the WAN section, click the Add icon ( ).
Figure 60. Adding a connection.
In the opened window, specify a name of the connection for easier identification in the Name field
(you can specify any name). Specify the VLAN ID provided by your ISP and click the SAVE
button.
Then in the LAN section, from the Bridged with drop-down list of the element corresponding to
the LAN port to which the additional device is connected, select the created connection. Click the
APPLY button.
Page 75 of 303
To Next Page
Loading...
