Figure 4.131 - Monitoring > Ethernet OAM > Browse Ethernet OAM Event Log
Select a Port and click Find to display the Ethernet OAM event log information.
Enter a Port or check All Ports then click Clear to remove Ethernet OAM event log information.
Monitoring > Ethernet OAM > Browse Ethernet OAM Statistics
This window displays the Ethernet OAM Statistic information on each port of the Switch. To clear information
for a particular port or list of ports, enter the ports and click Clear.
To view this window, click Monitoring > Ethernet OAM > Browse Ethernet OAM Statistics as shown
below:
Figure 4.132 - Monitoring > Ethernet OAM > Browse Ethernet OAM Statistics
Enter a Port or check All Ports then click Clear to remove Ethernet OAM Statistics.
Monitoring > Port Access Control > RADIUS Authentication
This table contains information concerning the activity of the RADIUS authentication client on the client side
of the RADIUS authentication protocol. It has one row for each RADIUS authentication server that the client
shares a secret with.
To Next Page
Loading...
Need help?
General
