D-Link DSG-1100-10/ME

D-Link DGS-1100-10/ME User Manual
1
1
1
1
1
1
- DSCP
Supports Strict / WRR mode in queue
handling
Support Port based bandwidth control
AAA
802.1X Local/RADIUS server
802.1X port-based/MAC-based access
control
RADIUS Accounting
User Account Privilege for Mgmt Access:
- Support 3 level user account
- Operator (Read/Write)
- Administrator (Read/Write)
- User (read only)
Security
Static MAC : Support 256 Static MAC
entries
Port Security:Support 64 MACs per port
Traffic Segmentation
D-Link Safeguard Engine
Broadcast Storm Control
OAM
Cable Diagnostics
802.3ah:
- 802.3ah D-Link extension: D-Link
Unidirectional Link Detection (DULD)
Management
Web-based GUI
D-Link proprietary CLI
Telnet Server: Support up to 8 telnet
session simultaneously
SNMP v1/v2c/v3
DHCP Client
DHCP Relay: Support DHCP local relay,
option 82.
DHCPv6 Relay: Support DHCP local relay
and option 37
SNMP Trap
RMON v1: Support 4 groups 1, 2, 3, 9
Web-based configuration backup /
restoration
Reset, Reboot
IPv6 Neighbor Discovery:
- Supports Max 256 ND entries
- Support up to 128 static ND
entries
D-Link Green Technology
Power Saving: save energy in 4 ways:
- Power Saving by Time Profile: Ports or the
system can be turned on/off by giving
schedule.
- Power Saving by LED Shut-Off: Posered
LEDs can be turned on/off by port or system
through schedule.
- Power Saving by Port Shut-Off: Each port
on the system can be turned on/off by
schedule.
- Power Saving by System Hibernation:
System enters hibernation by schedule. In
this mode, switches get most power-saving
fingures since main chipsets (both MAC and
PHY) are disabled for all ports, and energy
required to power the CPU is minimal.