DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
)
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
Figure 119. The System / Log page. The Settings tab.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter Description
Logging type
Select a type of logging from the drop-down list.
• Local: the system log is stored in the router's memory. When
this value is selected, the Server and Port fields are not
displayed.
• Remote: the system log is sent to the remote host specified in
the Server field.
• Local and remote: the system log is stored in the router's
memory and sent to the remote host specified in the Server
field.
Level Select a type of messages and alerts/notifications to be logged.
Server
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Port
A port of the host specified in the Server field. By default, the value
514 is specified.
After specifying the needed parameters, click the APPLY button.
Page 158 of 174
To Next Page
Loading...
Need help?
Power
Data Transfer Rates
